Gira Control 19, Installation And Operating Instructions Manual

Page: 18 / 21

38
GB
Restoring the operating system

Switch the Gira Control 19 Client off.

Connect a USB keyboard to the outside USB port and insert the recovery stick into the
inside USB port

Start the Gira Control 19 Client by pressing the ON/OFF button and press the "Del" key
on the USB keyboard several times during booting to access BIOS.

Select the Advanced BIOS Features item using the arrow keys of the USB keyboard
and confirm by pressing the Enter key.

Then select the Hard Disk Boot Priority item using the arrow keys of the USB keyboard
and confirm it by pressing the Enter key.

Select USB-HDD0 for 2. using the arrow key and change the position of USB-HDD0 to
1. using the + key.

Press the F10 key and confirm by pressing Enter.
Brief overview of the work steps described above in the BIOS
 Select Advanced BIOS features
 Select Hard Disk Boot Priority

Select USB-HDD0 and move it to 1.

Save with F10
The system boots automatically from the USB recovery stick, and the operating system is
restored after approximately 15 minutes. The following message must be displayed on the
screen of the Gira Control 19 Client.
Follow the instructions on the screen, remove the USB recovery stick and restart the Gira
Control 19 Client.
The restoration process has been completed successfully. Remove the USB stick
now and restart the system.
i
Note
If the USB recovery stick is not recognised by the system, insert the USB recovery
stick into another USB port and try again.
(The cause for this could be a preceding update of the BIOS.)