16
Switching acknowledgement tones on/off
Factory setting: Acknowledgement tone is activated.
The acknowledgement tones are activated/deactivated
as follows:
1. Lay the
programming finger
on until a short
acknowledgement tone is heard.
✔
The LED briefly lights up green, then flashes orange.
2. Lay the
administrator finger
on until a short
acknowledgement tone is heard.
✔
The LED briefly lights up green, then flashes orange
twice.
3. Lay the
programming finger
on until a short
acknowledgement tone is heard.
✔
The fingerprint reader generates a positive acknowl
-
edgement signal.
The acknowledgement tone is switched over.
Progr.
Admin
Progr. = Setting changes
