6
Teaching-in first administrator
Before first start-up, an administrator must be created.
If no administrator has been taught-in, the LED of the
fingerprint reader flashes green.
An administrator consists of an administrator finger and
a programming finger.
Teaching-in first administrator:
✔
The LED flashes green.
Teaching-in new administrator finger:
1. Lay the administrator finger on until a short
acknowledgement tone is heard.
✔
During laying on the LED lights up red, after removal
orange.
2. Lay the administrator finger on again (vary position
slightly) until a short acknowledgement tone is
heard.
3. Repeat step 2 until 1 long acknowledgement tone
is heard and the LED lights up green.
The administrator finger was taught-in successfully.
Admin
NEW
(7x)
Progr.
NEW
(7x)
i
Administrator and programming fingers
Administrator and programming fingers cannot be
used for subsequent switching actions.
