13
Deleting user finger
Start mode:
1. Lay the
administrator finger
on until a short
acknowledgement tone is heard.
✔
The LED briefly lights up green, then flashes orange.
2. Lay the
programming finger
on until a short
acknowledgement tone is heard.
✔
The LED briefly lights up green, then flashes orange
twice.
3. Lay the
programming finger
on until a short
acknowledgement tone is heard.
✔
The LED briefly lights up green, then flashes red.
Delete user finger:
4. Lay on the user finger to be deleted until a short
acknowledgement tone is heard.
✔
The LED lights up orange. The fingerprint reader gen
-
erates a positive acknowledgement signal:
The finger was deleted successfully.
✔
3 brief acknowledgement tones signify that an
unknown finger was laid on.
✔
The LED flashes red. Further user fingers can be
deleted.
After approx. 10 s the procedure is terminated.
5. Remove deleted user fingers from the table on
Admin.
Progr.
Progr.
Delete user
