o
Press button at bottom for longer than 0.4 seconds.
Light is switched on at minimum brightness.
i
If the button or 2-wire extension is pressed at the top or the push-button is pressed for
longer than 0.4 seconds, then the light is switched on to minimum brightness and then
brighter.
Save switch-on brightness
Button is combined with an insert for dimming.
o
Set light to the required brightness.
o
Press button over entire surface for longer than 4 seconds.
Switch-on brightness is saved. For confirmation the lighting switches off briefly and then on
again to the saved switch-on brightness.
i
An push-button cannot be used to save the switch-on brightness.
5 Information for electrically skilled persons
5.1 Fitting and electrical connection
DANGER!
Electrical shock when live parts are touched.
Electrical shocks can be fatal.
Before carrying out work on the device or load, disengage all the
corresponding circuit breakers. Cover up live parts in the working environment.
Connecting and fitting the device
To ensure good transmission quality, keep a sufficient distance from any possible sources of
interference, e.g. metallic surfaces, microwave ovens, hi-fi and TV systems, ballasts or
transformers.
The flush-mounted insert is correctly fitted and connected (see instructions for flush-mounted
insert).
o
Fit radio button (3) and frame (2) on flush-mounted insert (1).
o
Switch on mains voltage.
o
Carry out commissioning (see Commissioning chapter).
5.2 Commissioning
DANGER!
Electrical shock when live parts are touched.
Electrical shocks can be fatal.
During commissioning, cover the parts carrying voltage on radio transmitters
and actuators and in their surrounding area.
i
The button can also be commissioned with eNet server as an alternative to the
commissioning described here.
Connecting with radio transmitter
Load is switched off.
o
Press button over entire surface for longer than 4 seconds.
i
Switch inserts switch the load on until the Status LED flashes.
The status LED (4) flashes after 4 seconds. The button is in programming mode for
approx. 1 minute.
o
Switch radio transmitter to programming mode as well (see radio transmitter instructions).
o
Trigger telegram on the radio transmitter (see instructions of the radio transmitter).
The status LED lights up for 5 seconds.
32582722
10864994
27.04.2017
3/15
Wireless switching/dimming top unit, 1-gang
