Gira 2617 Series, Operating Instructions Manual

Page: 43 / 52

43
43
Removal alarm
The flush-mounted insert generates an alarm signal after
removal of fingerprint reader.
With individual device
If the fingerprint reader is removed from the flush-
mounted insert, a 1-minute continuous tone is emitted.
In door communication system
If the fingerprint reader is operated with the door com-
munication system, the removal signal can be forwarded
to a switching actuator in addition to the 1-minute con-
tinuous tone. Any switching action can then be carried
out via the switching actuator.
For this, the switching actuator is assigned as follows:
1. Press the "Systemprogr." button on the control device
for 3 secs. to start programming mode.
3 The LED at the control devices flashes.
The fingerprint reader generates an acknowledgement
tone and the LED flashes orange.
The operating mode LED of the switching actuator
flashes.
2. Press the button "Progr." at the switching actuator
3 The fingerprint reader again generates an acknowl-
edgement tone.
3. Remove the fingerprint reader from the flush-mounted
insert.
4. Press the "Systemprogr." button on the control device
to exit the programming mode.