Gira 2617 Series, Operating Instructions Manual

Page: 17 / 52

17
17
II
Teaching-in new programming finger:
4. Lay the programming finger on until a short acknowl-
edgement tone is heard.
3
During laying on the LED lights up red, after removal
orange.
5. Lay the programming finger on again (vary position
slightly) until a short acknowledgement tone is heard.
6. Repeat step 5 until 2 long acknowledgement tones are
heard and the LED lights up green.
The programming finger was taught-in successfully.
3 The first administrator was taught-in successfully.
7. Enter administrator with administrator and program-
ming finger into the table on Page 44.