Gira 2617 Series, Operating Instructions Manual

Page: 40 / 52

40
40
Start-up
1. Before first start-up, an administrator must be created.
An administrator consists of an administrator finger
and a programming finger.
2. All user fingers must firstly be taught-in in the finger-
print reader beforehand:
Assigning the switching actuator
1. Start programming mode at the control device.
2. Start the programming mode at the switching actuator
and select the operating mode "Switching".
3. In programming mode, assign a user finger to the
switching actuator:
For this, lay the selected user finger on the fingerprint
reader.
4. Exit programming mode at the control device.
Admin Progr. Admin User
NEW
(7x)