Gira 2617 Series, Operating Instructions Manual

Page: 21 / 52

21
21
IV
Teaching-in new administrator finger:
1. Lay the administrator finger on until a short acknowl-
edgement tone is heard.
3
During laying on the LED lights up red, after removal
orange.
2. Lay the administrator finger on again (vary position
slightly) until a short acknowledgement tone is heard.
3. Repeat step 2 until 2 long acknowledgement tones are
heard and the LED lights up green.
The administrator finger was taught-in successfully.
3 The LED lights up orange. Now teach-in the program-
ming finger within 10 seconds.
Teaching-in new programming finger:
4. Lay the programming finger on until a short acknowl-
edgement tone is heard.
3 During laying on the LED lights up red, after removal
orange.
5. Lay the programming finger on again (vary position
slightly) until a short acknowledgement tone is heard.
6. Repeat step 5 until 2 long acknowledgement tones are
heard and the LED lights up green.
The programming finger was taught-in successfully.
3 An administrator was taught-in successfully.
7. Enter the administrator in the table on Page 44.