38
Assigning a door station to the surface-mounted home station video
A door station call button is assigned to the sur-
face-mounted home station video as follows:
1. Press the "Systemprogr." button on the
con-
trol device
for 3 s to start the programming
mode.
2. Press the call button on the
door station
for
3 s. Release the call button following the brief
acknowledgement tone sounds.
✓
The door station outputs a long acknowledge-
ment tone.
3. Press the button
on the
home station
for
3 s until a brief acknowledgement tone is
heard.
✓
A long acknowledgement tone indicates
successful assignment.
Three short acknowledgement tones indicate
faulty assignment. The memory of the
surface-mounted home station video may
already be occupied. A maximum of 24 call
buttons can be assigned.
4. Briefly press the "Systemprogr." button on
the
control device
to exit the programming
mode.
i
Releasing the button after 3 s
If the button is not released after the first
acknowledgement tone, all call buttons of the
door station will be deleted after an additional
3 s.
3s
3s
3s
1x
12791390.fm Seite 38 Mittwoch, 24. September 2014 1:22 13
