31
Teach-in call
: the home station is assigned a call
button.
R: 3.24
Indicates how many call buttons have
already been taught in and the maximum num-
ber that can be assigned.
In this example the home station has already
been assigned 3 call buttons, and a total of 24
call buttons can be assigned.
Internal call
: here an internal call of the home
station is assigned to another home station or a
TC gateway.
S: 2.20
Indicates how many internal calls have
been temporarily stored.
In this example, 2 internal calls are temporarily
stored by the home station, a total of 20 internal
calls can be temporarily stored.
Switching action
: a switching action of the
home station is assigned to a switching actuator
here (see Page 41).
Factory setting
The settings of the home station are reset to the
factory settings here.
A differentiation is made between:
Display parameters:
Here the values of the
menu items Basic setting, Language, Bright-
ness, Contrast, Colour and Switch-on time are
reset to the factory setting.
The assignments to colour cameras, call buttons
and stations are retained.
i
Internal call - switching action
The "Switching action" menu item is only
active if the programming mode is active on the
switching actuator. In this case no internal calls
can be provided.
Assign
Switching action
R: 3.24 S: 2.20
Back
OK
Factory setting
Disp. parameters
Delete cameras
Del call asgnmnt
Delivered state
Back
OK
12791390.fm Seite 31 Mittwoch, 24. September 2014 1:22 13
