29
Frequency
The optimum frequency of the video signal of
the currently active transfer path is set for fine-
tuning of the video signal between the camera
and the home station.
The setting must be confirmed with
OK
.
If the menu item "Frequency" is ended with
(Back), changed settings are not applied.
i
Selecting camera beforehand
Before the menu item "Frequency" is selected, a
colour camera must be selected. If no camera
has been selected, the cameras available in the
system are listed for selection.
i
Setting with several home stations and
colour cameras
The frequency setting applies only for the con-
nection from the active home station to the
active colour camera. This means that the fre-
quency for the transfer path between the home
station and the colour camera must be set indi-
vidually if several home stations and/or colour
cameras are present.
If several cameras are present, the Start-up
menu must be exited to select the next camera,
then the next camera must be switched on with
.
Frequency
14
Back
OK
12791390.fm Seite 29 Mittwoch, 24. September 2014 1:22 13
