GIRA
Info
Hand-held radio transmitter
Installation Instructions
Hand-held radio transmitter
15/01
Page: 6 of 10
4.
All 3 group LEDs flash for confirmation and the
radio dimmers give off a short acoustic signal.
The All-ON key is now reprogrammed.
Proceed in the same way if you want to change
the All-OFF key, too.
A
B
C
1
2
3
4
5
1
2
3
4
5
6
7
8
<
>
>
<
Recalling / storing a lightscape
(hand-held Comfort transmitter only)
Before storing or recalling a lightscape, this
lightscape
must
have been assigned to one of the
lightscape keys (see "Programming a lightscape
key").
With keys (1... 5) , you can store (key de-
pressed at least 3 seconds) or recall (key de-
pressed less than 3 seconds) lightscapes.
Changing an assigned lightscape
This function is used to change your individual
lightscape settings.
Procedure
1. Recall the desired lightscape by depressing the
corresponding lightscape key (1... 5).
2. Compose your desired lightscape (e.g. light 1 =
50 %, light 2 = 70 %, louver in raised position).
3. Depress the desired lightscape key (1... 5) for at
least 3 seconds.
Note:
The old lightscape is now recalled (keep the key
depressed).
After approx. 3 seconds, the new lightscape is
activated and stored.
4. One of the group LEDs flashes for confirmation
and the flush-mounted radio receivers give off a
short tone signal.