GIRA
Info
Hand-held radio transmitter
Installation Instructions
Hand-held radio transmitter
15/01
Page: 3 of 10
A
B
C
1
2
3
4
5
6
7
8
>
<
Operation
Basic functions
Each channel key has 2 positions
(left =
/\
, right =
\/
).
Each key distinguishes between prolonged (> 1 s)
and momentary contact (< 1 s).
The following functions are possible:
Key
Lighting
short press on left side, /\
on
long press on left side, /\
brighter
short press on right side, \/
off
long press on right side, \/
darker
Key
Louver
short press left side, /\
adjust/stop
long press left side, /\
Up / cont. run
short press right side, \/
adjust/stop
long press right side, \/
Down / cont. run
Group
3 groups (A, B or C) with 8 channels each are
available (3 x 8 channels = 24 channels).
When one of the 8 channel keys is depressed,
group LED (e.g. group A) lights up briefly to
indicate the active group. After insertion of the
batteries, the active group is group
A.
Temporary change of the group
1. Depress the group key (A, B or C) briefly (less
than 4 seconds)
2. Depress the key of the desired channel within
the next 4 seconds.
Permanent change of the group
1. Depress the group key (e.g. key B) longer (at
least 4 seconds)
2. This is confirmed by the corresponding group
LED (e.g. B) flashing during approx. 4 seconds.
The active group is now group B.