Giorgio Bormac ICF-120 Plus User Manual Download Page 8

 
 

 

UM Ovens and Incubators EN rev. 0 31.05.2021 

                                  ATT

ENTION

 

 
 

Danger of burns 

 

The air intake cover on the back of the instrument becomes hot and must not be touched 
during operation of the oven. 

 

Risk of injury and breakage 

 

Always place the instrument only on surfaces that can support its weight. 

 

Overturning hazard and risk of injury  

 

Never stack more than 2 ovens/incubators on top of each other. 

 

Always fix 2 stacked ovens with the fixing plates provided.

 

 

 

Risk of injury, Risk of slipping or overturning and risk of damage to the instrument 

 

The instrument must be lifted by 2 people. 

 

The instrument must be transported in its original packaging only.  

 

The instrument must always be lifted from below with mechanical tools (e.g., forklift truck) 
together with the supporting pallet. 

 

The  instrument  must  not  be  lifted  directly  from  below  with  mechanical  tools  without 

supporting pallets (e.g., forklift truck). 

 

The instrument must not be lifted or dragged by pulling the door.

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for ICF-120 Plus





















Reviews: