49
ENGLISH
Solution
1. Change batteries.
2. Reinstall batteries.
3. Please contact the local service center.
Possible Reason
1. The batteries are drained or almost
drained.
2. The batteries are not inserted properly.
3. The device is broken out.
attention to the use of maintenance.
Please use the SD card with the memory not more than 1GB, or it may not
compatible with the device. The following brand and capacity of the SD card are
tested to work normally with this device: SanDisk (=1GB), Kingston (=1GB)
7 Troubleshooting
Trouble: The device can not turn on.
Trouble: The device is failure in measuring heart rate.
Trouble: ECG waveform excursion, strong irrelevant waveform or the ECG waveform displays
on the screen, but the prompt info is “lead off”; Possible Reason Solution
Trouble: After inserting the SD card, the device is off automatically.
Your SD card is not compatible with the device. Keep the SD card in the device and restart
the device for normal use.
Solution
1. Place the electrode correctly.
2. When measuring, please keep quiet
and avoid moving.
3. Keep away from interference source.
4. Change a place (chest) to measure.
Possible Reason
1. Electrode and body does not contact
well.
2. Moved when measuring.
3. Electromagnetic interference.
4. Weak signal.
Solution
1. Clean skin with soap and water and
eliminate skin crumb and grease to make
the skin wet and
greaseless.
2. Press the electrode with a certain force.
3. Keep hand relax while measuring.
Possible Reason
1. Skin is dry or oily.
2. Electrode and body does not contact
tightly.
3. Muscle strain.
Summary of Contents for CARDIO-B
Page 30: ...30 ENGLISH 1 Overview 1 1 Appearance Figure 1...
Page 56: ......
