32
Figure 2
Do NOT insert batteries with their polarities reversed. Dispose of the used batteries
according to applicable local regulations.
Protecting films are attached to the electrodes of device, so please remove the
protecting films before measurement.
3 Operation
3.1 Start to measure ECG
Press the Power button (lasting for 2 seconds) to turn on the unit. The unit starts to initialize,
and displays the following pictures.
Figure 3-1A Figure 3-1B
ENGLISH
The unit is not the monitor used in clinical institution or hospital, but is used for
spot-check purpose ONLY. It can not be used to substitute the normal ECG
examination or real time monitoring. The measurement results are a useful
reference for doctor, but do not make direct diagnostic or analytical decision
based on the information provided by this unit.
1.6 Operating Environment
Operating temperature
5~40°C
Operating humidity
30%~80%
Atmospheric pressure
70kPa~106kPa
2 Installation of Batteries
1. Open the battery cover (see the right figure).
2. Insert two AAA size batteries directly.
3. Close the battery cover.
Summary of Contents for CARDIO-B
Page 30: ...30 ENGLISH 1 Overview 1 1 Appearance Figure 1...
Page 56: ......
