100
Chapter 5
TROUBLESHOOTING
Trouble
Possible reason
Solution
Ca not turn on the device
The built-in battery is drained
Recharge by connecting the power
supply adapter
Battery is not installed
Install the Lithium battery
Some parts provided by other manufactu-
res are inserted to the connector
Remove the related parts and try again
No blood pressure result
The cuff is wrapped around the arm
incorrectly
Wrap the cuff around the arm correctly
The windpipe is not correctly inserted to
the NIBP jack
Insert the windpipe to the NIBP jack
No SpO
2
result
The SpO
2
probe is not plugged into the
"SpO
2
" connector (or Port1 or Port2)
Plug the SpO
2
probe into the "SpO
2
"
connector (or Port1 or Port2)
No TEMP result
The temperature probe is not correctly
plugged into "TEMP" connector (or Port1
or Port2)
Plug the temperature probe into
"TEMP" connector (or Port1 or Port2)
Taking measurements before "READY"
appears on the temperature probe screen
Do not take a measurement until
"READY" appears on the temperature
probe screen
ENGLISH
