5
ENGLISH
DESCRIPTION
This is a vacuum product which has a valve. After exhausting the air with
pump, it will become solid to achieve the effect of restriction.
Open the valve when not using it. Then it will fill with air and the vacuum
mattress kit will be soft enough to put into a bag.
STEPS
1.
Open the valve, twist the knob to the “OPEN” setting.
2.
Unfold it to distribute particles evenly throughout the product.
3.
Insert the pipe of the suction accessory into valve and exhaust a little air
first based on no move of the particles in the product. Twist the knob
to the “CLOSE” setting.
4.
Move the patient who need restrict onto the product and wrap up
the patient. Restrict the safety straps.
5.
Open the valve (twist the knob to “OPEN”), continue to exhaust air until
the product become completely solid. Close the valve (twist the knob
to the “CLOSE” setting) and remove the pipe.
6.
There are handles for transportation around the product, they can be used
to transit patient to stretcher or ambulance.
Warning
1.
The product must be used by trained personnel only
2.
If any soften phenomena occurred during the restriction process,
air should be pumped in sequentially and check the valve whether
it is closed.
3.
The device must always be checked before use to detect working
anomalies or damages caused by transport or storage.
4.
Two or more operators are needed to correctly use the product.
STORAGE AND MAINTENANCE
1.
Clean the product after every use.
2.
Do not use aggressive chemical to clean the product.
3.
Storage and operating temperature: could not be lower than -30 °C.
