23
Operation using cigarette lighter DC 12V
• Connect the device’s external plug 12V to the ligther plug with the cigarette lighter cable. Check the battery
power status of the vehicle before the cigarette lighter cable. Press the switch to start suction
• Press the switch to the I position to turn it on.
WARNING: Only use the originally supplied or recommended replacement cigarette ligther cables (view the
chapter “Important Safety Rules”).
NEVER USE THE DEVICE WITHOUT JAR AND / OR PROTECTION FILTER
Proximity functions
• Pressing the “Proximity” (Lights BLUE LED) is activated on / off the motor by an infrared proximity sensor
that detects the presence of the operator’s hand from a few inches away. This allows the operator to use
the device without touching or focus on pressing the button.
• The on / off button is also active with the function of proximity inserted and can be used as an alternative.
• To remove the “Proximity” you have to re-press the button.
The “Proximity” is retained, or if it was active before power off, then on again to return to this, but if it was
not active will remain disabled. The function set to power down the card after 20 minutes after turning off the
engine if it is not then on again.
The unwanted approach of the hand to the Proximity sensors causes the device to switch off.
To reactivate the function, place the hand close to the sensors.
NOTE: It is up to the end user to activate or deactivate the Proximity sensor. With the Function off, the device
is activated/deactivated by pressing the ON/OFF key.
RISK OF ELECTROMAGNETIC INTERFERENCE AND POSSIBLE REMEDIES
This section contains information regarding the conformity of the compliance with the EN 60601-1-2 Standard
(2015).
The SUPERVEGA EVO SUCTION UNIT surgical aspirator is an electro-medical device that requires particu-
lar precautions regarding electro-magnetic compatibility and which must be installed and commissioned ac-
cording to the electro-magnetic compatibility information supplied. Portable and mobile radio communication
devices (mobile phones, transceivers, etc.) may interfere with the medical device and should not be used in
close proximity with, adjacent to or on top of the medical device. If such use is necessary and unavoidable,
special precautions should be taken so that the electro-medical device functions properly in its intended
operating configuration (for example, constantly and visually checking for the absence of anomalies or mal-
functions). The use of accessories, transducers and cables differing from those specified, with the exception
of transducers and cables sold by the appliance and system manufacturer as spare parts, can lead to an
increase in emissions or in a decrease of the immunity of the device or system. The following tables supply
information regarding the EMC (Electromagnetic Compatibility) characteristics of the electro-medical device.
ENGLISH
Large three-digit
number (000)
It displays the negative
pressure set by keys “up”
and “dw”
Fixed white or green back-light
depending on whether external
power supply or battery is used.
Central in digits of large
dimensions
