18
NEVER INHALE IN HORIZONTAL POSITION.
DO NOT TILT THE NEBULIZER OVER 60°.
ELECTROMAGNETIC INTERFERENCE RISKS AND POTENTIAL
CORRECTIVE MEASURES
This section contains information on the device compliance with EN 60601-1-2 (2015). Eolo is a medi-
cal device suitable for household use.
Group ranking and CISPR category: group 1, category B
Avoid using this device close to or overlapped on other appliances because it could not work
properly. If such use is necessary and inevitable, special precautions shall be adopted so that the
electromedical device works properly in its standard configuration (for instance, by steadily and visually
checking the absence of anomalies or malfunctions).
The use of accessories, transducers and cables other those supplied by the manufacturer of the
appliance may cause an increase in the electromagnetic emissions and/or a reduction in the electro-
magnetic immunity of the device, thus causing a malfunction.
Portable and mobile radio communication devices (mobile phones, transceivers, including periph-
eral devices like antennas cables and external antennas, etc.) may affect the medical device and should
not be used close to (at more than 30cm from any part of the device, including cables), adjacent to or
overlapped on the medical device. If such use is necessary and inevitable, special precautions shall be
adopted so that the electromedical device works properly in its standard configuration (for instance, by
steadily and visually checking the absence of anomalies or malfunctions).
The tables below provide information on the EMC characteristics (Electromagnetic Compatibility) of this
electromedical appliance.
Guide and declaration of the manufacturer – Electromagnetic Emissions
The Eolo aerosol can be used in the following electromagnetic environment. The Customer and/or the
user of the Eolo aerosol shall make sure that the appliance is used in such environment.
Emission test
Conformity
Guide to the electromagnetic
environment
Radiated emissions /
Conductions CISPR11
Group 1
The Eolo aerosol uses RF energy only for Inter-
nal function. Therefore, its RF emissions are very
low and do not cause any interference with other
nearby electronic appliances.
Radiated emissions /
Conductions CISPR11
Class [B]
The Eolo aerosol is designed for use in any envi-
ronment, including households and those directly
connected to the public power distribution grid
which supplies power to environments intended
for domestic use.
Harmonic currents
EN 61000-3-2
Class [A]
Voltage fluctuations /
flicker EN 61000-3-3
Compliant
ENGLISH
Summary of Contents for 28091
