background image

Requirements for transport and storage:

•  No corrosion gas and well-ventilated room.

•  Keep the device out of the reach of children.

•  Do not store the device in conditions such as direct sunlight, high temperature, humidity, dust or water infiltrations, etc.

•  Keep the device away from sloping surfaces, vibrations or shocks.

•  Transportation adopts general transportation means or follows the contract requirements. Avoid violent shock, vibration, rain 

and snow splash during the process of transportation.

5.4 Pollution-free disposal and recycling

The service life of product is 3 years. If the device exceeds the period of use, it must be discarded. Please contact the manufac-

turer or distributor for more information.

1) The atomizer out of use can be sent back to the manufacturer or distributor for proper recycling.

2) Used parts can be returned to the manufacturer or distributor for disposal, or treated in accordance with relevant laws and 

regulations.

Chapter 6 
TROUBLESHOOTING

17

ENGLISH

Problems

Reason analysis

Solutions

The device can't startup.

Battery is not well installed.

Check the installation of battery, and reinstall 

the batteries.

No atomizing or little atomizing 

appears when device working.

Medication cup is not well installed.

Check the installation of medication cup, and 

reinstall it. 

No medication in medication cup. 

Trickle  medication  into  medication  cup,  re-

member not to exceed its maximum capacity.

Improper medication.

Consult a doctor about whether the medica-

tion is suitable for the device.

The nebulizing sheet is dirty.  

Clean medication cup.

There is water around the nozzle 

of nebulizer. 

Due to temperature differences, the temper-

ature of medication cup surface is relatively 

low, medication mist comes in contact with the 

nozzle, then condenses into water droplets.

Remove medication cup, pour the water out.

After startup, power indicator 

lights about. 1s, then immediate-

ly goes out.

Medication cup is not well installed.

Install medication cup once again.

Medication cup is not loaded with any med-

ication.

Put the medication into medication cup after 

consulting your doctor.

After turning on the device, the 

power indicator lights once, then 

it is out immediately or the de-

vice cannot work normally.

The battery had run down.

Replace the batteries immediately.

Nebulizer,  doesn't  automatically 

shutdown when medication is 

used up.

Medication may generate bubbles in medica-

tion cup.

Press “ON/OFF” button to turn off the device, 

and clear up the bubbles.

Medication  may  be  stuck  on  the  nebulizing 

sheet.

Press “ON/OFF” button to turn off the device, 

and clean medication cup.

The electrodes contacting with the medication 

cup may be dirty. 

Press “ON/OFF” button to turn off the device, 

and clean the electrodes.

If the device still can't work normally alter using all methods above, please contact our after-sales service.

Summary of Contents for 28066











Reviews: