background image

25

Disposal

: The product must not be disposed of along with other 

domestic waste. The users must dispose of this equipment by 

bringing it to a specific recycling point for electric and electronic 

equipment. For further information on recycling points contact 

the local authorities, the local recycling center or the shop where 

the product was purchased. If the equipment is not disposed 

of correctly, fines or penalties may be applied in accordance 

with the national legislation and regulations.

GIMA WARRANTY CONDITIONS

Congratulations for purchasing a GIMA product. This product meets high 

qualitative standards both as regards the material and the production. 

The warranty is valid for 12 months from the date of supply of GIMA.

During the period of validity of the warranty, GIMA will repair and/or replace 

free of charge all the defected parts due to production reasons. 

Labor costs and personnel traveling expenses and packaging not included.

All components subject to wear are not included in the warranty.

The repair or replacement performed during the warranty period shall 

not extend the warranty. The warranty is void in the following cases: 

repairs performed by unauthorized personnel or with non-original spare 

parts, defects caused by negligence or incorrect use. GIMA cannot be held 

responsible for malfunctioning on electronic devices or software due to 

outside agents such as: voltage changes, electro-magnetic fields, radio 

interferences, etc. The warranty is void if the above regulations are not 

observed and if the serial code (if available) has been removed, cancelled 

or changed.

The defected products must be returned only to the dealer the product was 

purchased from. Products sent to GIMA will be rejected.

ENGLISH

Summary of Contents for 27363

















Reviews: