Gilson VALVEMATE, User Manual

Page: 69 / 72

C-4
Appendix
C
GSIOC Commands
L B Locks the keypad.
Lx B Locks or unlocks the front panel depending on the value
assigned to x:
0 - unlock front panel
1 - lock front panel
M I Reads the counter that tracks valve turns.
Mx B Sets the counter that tracks valve turns. Replace x with a
number from 0 to 99999.
For example, the command ‘M0’ sets the number to 0; you
use this command after installing a new valve.
n B Changes the valve position display to numbers and moves
the valve to the position n, where n is a number between 0
and 8.
N I Reads the counter that tracks the number of hours that
either the VALVEMATE or a valve has been in use.
Nx B Sets the counter that tracks the number of hours that either
the VALVEMATE or a valve has been in use. Replace x
with a number from 0 to 99999.
For example, the command ‘N0’ sets the number to 0; you
can use this command after installing a new valve.
P I Identifies the current valve position. Returns ‘sp’, where s is
status and p is position.
s - ‘P’ for Parked, ‘M’ for Moving, or ‘E’ for Error
p - ‘A’ to ‘H’.
For example, if the valve was in position A, the
VALVEMATE returns ‘PA’.
Px B Changes the valve position display to letters and moves the
valve to the position set by x, where x is a letter between A
and H.
For example, if you want to go to position A, send the
command PA.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com