manualshive.com logo in svg

Gilson VALVEMATE, User Manual

Share
Download
Gilson VALVEMATE User Manual Download Page 45

4-2

Maintenance

4

Replacing the Fuse(s)

Replacing the Fuse(s)

A blown fuse may indicate the existence of another

problem in the instrument. If the replacement fuses

blow, do not try others.

To change a fuse, follow these steps.

1 Disconnect the power cord from the power

outlet and from the rear panel receptacle.

2 Locate the fuse drawer on the rear panel. See

page 

2-2

 if necessary.

3 Insert a small screwdriver into the notch located

below the fuse drawer.

4 Twist the screwdriver to open and remove the

fuse drawer. The fuse drawer contains one

2.0A “T” Slo-Blo fuse (5 x 20 mm size) for a

100/120 voltage selection. It contains two 2.0A

fuses for a 220/240 voltage selection.

5 Remove the old fuse(s) and insert the new

fuse(s).

6 Insert the fuse drawer into its receptacle in the

valve actuator.

Fuse installation for

220/240 voltage

Fuse installation for

100/120 voltage

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for VALVEMATE









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands