CL
E
AN
IN
G
, D
E
C
O
N
TAM
INA
T
IO
N
, AN
D
MA
IN
T
E
NAN
CE
6
CLEANING, DECONTAMINATION, AND MAINTENANCE
|
POWER CARROUSEL
TM
Chapter 4
CLEANING, DECONTAMINATION, AND
MAINTENANCE
Cleaning and Decontamination
•
To clean POWER CARROUSEL, wipe it with a soft-cloth or lint-free tissue dipped in a
simple soap solution or 70% Ethanol, to remove all marks. If POWER CARROUSEL is
very dirty, a brush with soft plastic bristles may be used.
•
To rinse, wipe POWER CARROUSEL with a soft cloth or lint-free tissue dipped in
distilled water.
•
Allow it to air-dry or dry it carefully with a soft-cloth or lint-free tissue.
If you use chemical solutions for decontamination or detergents for cleaning other than
those specified below, you should check with your supplier that the solution or detergent is
safe for use with the following materials: polypropylene, steel, rubber.
Maintenance
POWER CARROUSEL must be cleaned regularly. If necessary, you can replace:
Do not autoclave POWER CARROUSEL. Extreme heat will damage electronic
components.
Do not immerse POWER CARROUSEL. Liquid inside will damage its internal
components.
MODEL
PART NUMBER
The antiskid rubber feet
5462105001
Power supply
FB07001
POWER CARROUSEL must not be opened. Repairs must be carried out by Gilson
or a service company authorized by Gilson.
Please contact your local Gilson representative for the replacement of spare parts.
