47
PLC 2050/2250/2500 PurifiCation SyStemS |
uSer’S GuiDe
IN
S
ta
LL
a
f
t
e
r
M
ar
k
e
t
O
p
tI
O
N
S
Install the Standalone Column Holder for LC Columns
When flash chromatography
columns are used with the system,
use the standalone column holder
(Pn 21040015) for LC Columns.
it is equipped with low-pressure
Luer connections and fittings
for easy injection on top of the
column. the maximum overall
external diameter is 115 mm and
the maximum overall height is
400 mm.
Install the Acquisition
Module for Additional Detectors
the system is equipped with a built-in analog input to acquire the signal from an additional
detector. to improve the quality of the external detection and increase the number of signals
acquired, the acquisition module for additional detectors can be used. it allows users to plot
more precise curves and acquire up to four signals simultaneously with GGP Software.
follow the procedure supplied with the module to install the requested drivers, connect it to
the system (via a uSB port), and then to the analog output(s) of external detector(s).
Figure 39
Standalone Column Holder
Figure 40
acquisition module
Figure 41
acquisition module Connections
