Chapter 2
INSTALLATION
Read this section carefully before installing and operating PLATEMASTER.
The instrument described in this user’s guide should only be operated by qualified
personnel in a laboratory or similar indoor environment.
Cleaning, installation, dismantling, maintenance, adjustment, and repair should be
performed by appropriately trained personnel aware of the hazards involved.
If a spill occurs, refer to the material safety data sheet (MSDS) provided by the
chemical manufacturer before cleaning up the spill and take all safety precautions
required.
Remove PLATEMASTER pipetting head and PLATEMASTER base from box.
Insert the pipetting head as follows and secure the head by screwing the first screw
down.
Figure 2
Unpacking PLATEMASTER® head and base
Figure 3
Location studs
on head
Figure 4
Sockets for location
studs on base
Figure 5
Insert the location
studs into the sockets
Figure 6
Pull the head down a little and turn the screw
to the lower stop
Keep the packaging!
It will be useful for sending the device for any maintenance and
calibration.
1
2
3
NOTE
IN
ST
A
LL
A
TIO
N
5
PLATEMASTER®
|
USER’S GUIDE
Summary of Contents for F110761
Page 1: ...User s Guide EN...
Page 18: ...NOTES Notes 18 Notes PLATEMASTER...
