7. Install the projector bracket
Align the projector bend arm and the holes on the upright post, then fix
the bend arm to the upright post with
screws.
8. Fix the projector onto the tray with prepared screws and plug in.
9. Hang the eyesight detector onto the horizontal sliding rod, tighten the
knob, then adjust the eyesight detector to a suitable position.
10. Place the computer or other related instruments on the operating
board, connect it to the outlet below the board with the prepared power
line.
11. Power on to test the wire connection, check the keys’ function of the
control panel, if the connection is correct, fit the back cover of the
mainframe.
Summary of Contents for GRT-700
Page 1: ...USER S MANUAL ...
Page 15: ......
