5. Install the rocker
Take out the rocker and hang it onto the upright post, stick the sliding
cover into the hole on the top of the rocker, then install the horizontal
sliding rod and tighten it with the screw. At last, fix the rocker locker to
the rocker, make sure that the rocker can run softly and comfortably.
6. Install the bend lamp tube
Connect the power line in the bend lamp tube with the power line on the
top of the upright post according to the same color and push the
connected power line into the upright post, then fix the bend lamp tube to
the upright post.
Summary of Contents for GRT-700
Page 1: ...USER S MANUAL ...
Page 15: ......