GILLIG LOW FLOOR, Service Manual

Page: 17 / 506

7
Specifications
Differential / Rear Axle Oil (Continued)
Gear Oil Type API Spec. SAE Viscosity Meritor Spec. SAE Spec. Outside Temperature
Standard-Drain
Lubricants
petroleum with ep
additives
gl-5
85w/140 o76-A
sAe J2360
tested and
Approved
Above +10°f (–12°c)
80w/140 o76-b Above –15°f (–26°c)
80w/90 o76-d Above –15°f (–26°c)
75w/90 o76-e Above –40°f (–40°c)
75w o76-J from –40°f (–40°c) to +35°f (+2°c)
75w/140 o76-l Above –40°f (–40°c)
Extended-Drain
Lubricants
petroleum with
extended-drain base
oils and ep additives
gl-5
75w/90, 80w/90,
80w/140 or
75w/140
o76-Q, o76-r
sAe J2360
tested and
Approved
depends on viscosity. refer to the
viscosity grades listed above.
petroleum with semi-
synthetic base oils
and ep additives
80w/90 o76-p Above –15°f (–26°c)
fully synthetic base
oil and ep additives
75w/140 o76-m Above –40°f (–40°c)
fully synthetic base
oil and ep additives
75w/90 o76-N Above –40°f (–40°c)
Hydraulic Fluid
14.4 qt / 13.6 L (including reservoir, hydraulic lines, and
hydraulic system components)
15W-40, API Category CI-4 Engine Oil
A/C Compressor Oil
See compressor manufacturer’s recommendations.
Front Wheel Bearing Grease
Lithium 12-Hydroxy Stearate, NLGI Grade 1 or 2
Steering & Brake Component Grease
6% Lithium 12-Hydroxy Stearate, NLGI Grade 1
8% Lithium 12-Hydroxy Stearate, NLGI Grade 2
U-Joint & Driveshaft Slip Spline Grease
NLGI E.P. Grade 2 Lubricating Grease