Gill AGX M4 POLE VAULT Manual Download Page 1

 6' - 21' 

Graphic Pad

- Safety

- Spectator Involvement

- Custom Artwork

Aluminum Upright

Adjustable Offset

Base Protector Pads

sold seperately

Item #740111CXX

 22'-1" 

Traveling Offset Carriage

Steel Base

- Concrete anchors

- Leveling bolts

- Hinge System

- Dual hand crank system simplifies and speeds up height transitions

- Customize exclusive 2" safety pad with choice of color and graphics

- 2" safety pad increases safety of athletes and reduces vaulting pole damage 

- Simple brake mechanism with ON / OFF positions

- Internal measuring tape displays Metric and English units

- Quick hand crank crossbar depth adjustment from 0cm to 80cm 

- Exclusive customizable offset width between pins from 4.30m-4.37m

- Steel base for stability during use and Easy-Port hinge technology for quicker  location movement 

- Strong aluminum profile increases aesthetics, functionality, and customization

- Height range from 6'-6"' to 21'

www.gillathletics.com

Copyright 

2016 by Gill Athletics.  

All rights reserved.

800-637-3090

10/8/2018

INST740110CXXYYSP

Page 1 of 17

740110CXXYYSP - AGX M4 POLE VAULT STANDARDS

SPEC SHEET

Summary of Contents for AGX M4 POLE VAULT


















Reviews: