USAGE
3. Adjust the shoulder strap height
Always check that the shoulder straps are at the correct height for your child. The
shoulder straps should always be thread through the slots in the cover and seat
shell that are closest to the top of your child's shoulders.
NO-Too low
NO-Too high
YES-Correct
If the height of your shoulder belts in child car seat is not fit for your child, adjust
the height of the shoulder belt, please proceed as follows:
Step 1.
Press the red bu on of the buckle downwards, the two metal sec ons will
be pop up.
Step 2.
Pull out two metal sec ons of the buckle from the chest and the slots on
the cover and the shell.
Step 3.
Then thread them into the appropriate belt slots and fasten the buckle.
Make sure that both of the shoulder straps go through slots at the same height
and not twisted.
4. Adjust and use the harness
Loosen the harness
The harness is slackened by pressing the
adjuster (under the adjuster cover) on the front
of the seat. Press down the adjuster as you grip
the two shoulder straps with your other hand.
Pull the shoulder straps towards you to loosen
the harness.
4