GILES OVH-10, Operation & Service Manual

Page: 39 / 78

30
Model: PO-VH & OVH-10 Operation & Filter Maintenance
4-02.09. EAC Filter Installation
EAC Air Flow
Arrow must
point to the
left.
4-02.10. EAC Filter Status
The three indicator lights on the Control Panel display the status of the EAC Filter.
1
1
3
2
3
ON The EAC Filter is in place and powered.
WASH The EAC Filter is becoming excessively
dirty and must be cleaned. If this light is
on for more then 2 minutes an intermittent
alarm will sound, (if the hood is interlocked
with the Appliance below the hood, then
the Appliance will turn off).
CHECK The EAC Filter is not operating. Either the
filter is not getting a proper electrical con-
nection or it is damaged. If this light is on
for more then 2 minutes an intermittent
alarm will sound, (if the hood is interlocked
with the Appliance below the Hood, then
the Appliance will turn off).
2
EAC alignment
block
Hood Contact
Plate
Filter Contact
Plate
Plates must
make contact
Front Access Panel