GILES OVH-10, Operation & Service Manual

Page: 34 / 78

25
Model: PO-VH & OVH-10 Operation & Filter Maintenance
4. Operation & Filter Maintenance
This section describes the operation of and the filter maintenance for the Ventless Hood.
4-01. Hood Operation
This section describes how to start the Ventless Hood. Make sure all the Filters are in place before operat-
ing the unit.
1. Press the Power Switch to the ON position, (if
ILS, then press and hold the “Push and Hold to Start”
switch, for 5 seconds) EAC ON light will illu-
minate UV sight window will illuminate
indicating that UV is operating (
UV Only ).
This will turn the Hood on and the Hood Fan will
begin running. The appliance under the hood, if inter-
locked to the hood, may now be turned on.
2 3
1
4-02. Filters and Filter Maintenance
This section describes each Filter in the Ventless Hood.
4-02.01. Ventless Hood Filter Table
1
3
Filter
When to clean or
replace
How to remove How to clean How to install
Baffle Filter Clean daily Section 4-02.06 Section 4-02.07 Section 4-02.08
EAC Filter Clean daily Section 4-02.08 Section 4-02.11 Section 4-02.09
Charcoal Filter
Replace every 30
days,
P/N 31964 (PO-VH)
P/N 31963 (OVH-10)
Section 4-02.12.
Never clean, only
replace
Section 4-02.15
Section 4-02.13.
Ultra Violet Lamp
Clean every 30
days
Replace annually
Section 4-02.16 Section 4-02.18 Section 4-02.17
*2
* -ILS only
4
4