GILES OVH-10-FB, Operation & Service Manual

Page: 40 / 54

30
Model: OVH-10-FB & 11-FB Hood Cleaning & Maintenance
To maintain effectiveness and performance, the Hood should be deep cleaned, at a minimum, every 3 months.
1. Disconnect power to the unit, preferably at the breaker panel.
2. Remove all filters from the hood.
3. Using a soft cloth, sponge, or towel and a mild bio-degradable degreaser, clean the entire hood plenum section
to remove grease film accumulation from interior surfaces.
5. Thoroughly clean the under-skirt area and all exterior surfaces with mild degreaser, or a good quality stainless
steel cleaner.
6. Allow hood to thoroughly dry, or wipe dry with clean dry cloth.
7. Clean filters as needed and replace in Hood.
8. Restore supply power to Hood.
5-02. Hood Cleaning
●
DO NOT wash down hood with water from a spray hose.
●
DO NOT steam clean or use any type pressure washer.
●
DO NOT use products containing chlorine, or other caustic chemicals.
●
DO NOT use abrasive products, steel wool or scouring pads.
CAUTION
5-02.1 Weekly Cleaning
As a minimum, weekly cleaning is recommended to maintain the Hood’s appearance and prevent future problems.
1. Turn OFF Hood and appliance power, preferably at the breaker panel.
2. Clean the under-skirt area and all exterior surfaces with mild degreaser, or a good quality stainless steel cleaner.
3. Remove filters and clean filter rack and interior plenum surfaces.
5-02.2 Quarterly Cleaning