GILES GBF-50 Page 9 Operation & Service Manual Download

Page: 9 / 111

Safety

GBF-50 Fryer

• Exposed control panel components are impact

‐

sensitive. To avoid damage and ensure proper operation,

exercise care when working around or using carts/rolling tables near the appliance.

•

DO NOT

install the unit near combustible walls and materials. Failure to maintain safe distance may result in

fire.

• When cleaning the appliance:

‐

DO NOT

steam clean.

‐

DO NOT

use products containing chlorine, or other corrosive chemicals.

‐

DO NOT

use abrasive products, steel wool or scouring pads.

‐

DO NOT

use oven cleaners.

•

DO NOT

alter, add attachments, or otherwise modify this equipment!

• Failure to comply with

CAUTION

notices may result in damage to equipment or property, and void the factory

warranty.

NOTE:

• Installation, maintenance and repairs of this appliance should be performed only by qualified professional

commercial kitchen equipment technicians.

• Users must comply with all appropriate state and/or local heath regulations regarding food service operations,

and cleaning and sanitization of food service equipment.

Summary of Contents for GBF-50
















































































































Search results

Summary of Contents for GBF-50

Reviews:

Related manuals for GBF-50

Brands by name

Popular brands

GILES GBF-50, Operation & Service Manual

Search results

Summary of Contents for GBF-50

Reviews:

Related manuals for GBF-50

Brands by name

Popular brands