GILES GBF-50, Operation & Service Manual

Page: 29 / 111

19
Overview
GBF-50 Fryer
3.02 Control Panel
Item Description Function
1 Power Switch
Turns appliance power ON/OFF. Pressing top of switch turns power
ON , pressing bottom turns power OFF .
2 Heat Switch
Place switch in [HEAT] position to enable heating elements. If actual
oil temperature is lower than the controller setpoint, elements will
be turned
ON and cooking oil will begin heating. When in the [OFF]
position, elements are disabled and will not turn ON , even if the
controller is calling for heat.
3 Computer Controller
Regulates oil temperature and cooking time. Features
programmable presets for [50] different menu items,
Boil ‐ Out
program, Force Filter control, Auto ‐ Cool Mode , Low Oil detection,
password security & multiple language selections. Monitors fryer
status, displays error & alarm messages and operational instructions
3.1 Function Keys Activate various controller actions
&
functions.
3.2 Controller Keypad
Enter values & settings ... menu numbers, time & temp, start &
cancel functions.
[2] • [4] • [6] • [8] keys serve as arrow keys for
various functions.
5 POWER Light (Green) Illuminates whenever the main POWER switch is [ON] .
6 HEAT Light (Amber)
Illuminates when the HEAT switch is in the [HEAT] position and the
heating elements are energized. Cycles ON & OFF during normal
operation as temperature is maintained.
7 HI ‐ LIMIT Light (Red)
Indicates oil has overheated and tripped the high temperature limit
safety thermostat. Typically, when light is ON , there is temp control
malfunction. DISCONTINUE COOKING and CALL FOR SERVICE or see
Section 7, Troubleshooting . DO NOT ATTEMPT TO CONTINUE
COOKING UNTIL CAUSE OF THE CONDITION IS DETERMINED!
8
*
PUMP Switch
Controls the fryer pump when filtering oil, or discharging waste oil
to hose
or bulk waste collection tank . NOTE: On banked systems
switch is only on the unit with filter pan, otherwise the position is
plugged.
9
*
LIFT Switch
(Optional)
Enables/disables optional Basket Lifts, when equipped. When in
the [LIFT] position, they will operate to automatically lower
&
raise
baskets at the beginning and end of cooking cycles. When in the
[OFF] position, lifts are disabled and will not operate. NOTE:
Switch is present only when basket lift option is installed,
otherwise the position is plugged.
10
“ADD OIL” Pushbutton Switch
(Optional)
For optional Top ‐ off or Bulk Fresh Oil system ... operates auxillary
top ‐ off pump, pumping oil from saddle tank to vat.
‐ OR ‐
On unit connected to a customer ‐ provided bulk fresh oil supply
system , switch is wired to directly operate bulk oil pump, pumping
fresh oil to vat for filling or top ‐ off..
Pump operates only while switch is held. Switch not on panel if
option not is not installed.