GILES FSH-5, Operation & Service Manual

Page: 9 / 70

vii
Model: FSH-5 & FSH-6 Safety
• Exercise care when removing wooden crate framework and the unit from shipping pallet. The Floor Stand
version will be very top-heavy once fully assembled, use extreme care when moving the unit into its final
location.
• Once located, be sure a Floor Stand units is properly leveled and anchored.
•
DO NOT operate the appliance, unless its components and their intended functions are fully understood (see
Section 3 ). Once you have read and fully understand Section 3 , closely follow the instructions presented in this
Operations Manual in order to prevent equipment damage, or malfunction.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental
capabilities, or lack of experience and knowledge, unless they have been given adequate instruction and/or
supervision concerning its use by a person responsible for their safety. Children should not be allowed to play
with, or around, this appliance.
• When working in the kitchen environment, take necessary precautions to avoid injury due to HOT cooking
appliances, utensils, tools, etc. As applicable, always wear thermal protection, such as oven mitts or gloves,
when handling hot pans, utensils or foods.
• Failure to comply with CAUTION notices may result in minor to moderate personal injury, damage to equipment
or property, and potentially void the warranty.
• Components exposed on the Control Panel surface are impact-sensitive. To avoid damage and maintain proper
operation, exercise care to avoid damage and maintain proper operation.
• Handle the Electronic Air Cleaner (E.A.C.) Cell carefully. DO NOT bend the collection plates (fins) or break any of
the ionizer wires. Doing so will significantly reduce the performance of the EAC and can eventually cause power
to the appliance beneath the Hood to be shutdown.
• DO NOT attempt to dry the E.A.C. Cell after cleaning by installing it and running the hood or by running the
appliance below the hood to generate heat for drying. This could potentially damage the EAC Power Supply
causing improper operation and voiding the warranty. NEVER PLACE A WET E.A.C. CELL INTO THE HOOD .
• When cleaning the appliance:
- DO NOT steam clean.
- DO NOT use products containing chlorine, or other corrosive chemicals.
- DO NOT use abrasive products, steel wool or scouring pads.
- DO NOT use oven cleaners.
• DO NOT alter, add attachments, or otherwise modify this equipment! DO NOT attempt to attach any type of
ductwork to the Hood exhaust.
• Failure to comply with CAUTION notices may result in damage to equipment or property, and void the factory
warranty.
Specific Safety Precautions: