GILES FSH-5, Operation & Service Manual

Page: 46 / 70

36
Model: FSH-5 & FSH-6 Operation & Filter Maintenance
If a Baffle Filter , Pre-Filter , or Charcoal Filter is not in place, or not positioned correctly, the red [FILTER MISSING]
light will turn ON.
P
ower to all appliances under the Hood is turned OFF until the condition is corrected. No
audible alarm will sound.
• Hood fan will continue to run.
• Check to confirm that all Filters are in place. See Sections 4.02.3
- 4.02.5 - 4.02.9, Filter Installations.
• Remove and reinstall Filters, ensuring they are seated properly
in guides and are pushed fully into the filter compartment so
that Doors will properly close. Each Filter must also actuate a
proofing switch located in filter channels (Charcoal & Pre-Filter switches are in the top of the compartment;
Baffle Filter switches are located in the filter rack).
4.03 Hood Filter Alarms
4.03.1 Baffle, Pre-Filter or Charcoal Filter Missing
If a Baffle Filter , Pre-Filter , or Charcoal Filter become clogged, or other conditions occur that obstruct airflow
through the Hood such that it falls below the minimum required to provide effective capture of grease-laden
vapors,
p
ower to all appliances under the Hood is turned OFF until the condition is corrected and a constant tone
audible alarm will begin sounding.
• Hood fan will continue to run.
• Clean the Baffle Filter, or replace Charcoal or Pre-Filter. See Sections 4.04.1, Baffle Filter Cleaning, 4.03.4, Pre-
Filter Maintenance and 4.03.5, Charcoal Filter Maintenance .
• Inspect Hood plenum to ensure that no other obstructions exist.
• Check the Hood exhaust outlet and be sure that nothing is obstructing it or the surrounding area.
4.03.2 Baffle, Pre-Filter or Charcoal Filter Clogged