GILBARCO VEEDER-ROOT Passport PX60 Installation Manual Download Page 69 | Manualshive

Page: 69 / 70

background image

MDE-5183C Passport® PX60 Express Ordering Kiosk Installation Guide · May 2018

Page 69

Troubleshooting

Kitchen Monitor

Not displaying
kiosk
transactions
(serial
connections)

Connections on kiosk
printer



Y-cable and gender
menders (MicroPlus serial
setup), monitor
configuration
(programming).

If the site has more than one kiosk, verify if the symptoms are for one or all.
Screen black, check connections and power. Display has power but is not
displaying orders, check connections at KMS interface (MicroPlus
solution), verify whether the gender mender A is used with B for each kiosk
and power to interface, reset interface and monitor. If connections and
configurations are fine, it may have bad cable or gender mender. If some
kiosk transactions are displayed, but not all, check connections for each
individual kiosk at the monitor interface and at kiosk printer. Reset monitor
interface and reboot kiosk.

Not displaying
kiosk
transactions
(network IP
config) This is
the preferred
method for the
Kitchen Monitor
setup

Check IP Settings on
MicroPlus Screen. Either
No IP Configured on
MicroPlus or IP Address
never entered into
Express Ordering software

Confirm MicroPlus EPAD is connected to customer network. Run Ping test
to confirm you can ping component from Kiosk 001. If no IP address
configured on MicroPlus,

refer to

“MicroPlus KMS”

If the

connections are correct, you need to make sure that MicroPlus is
connected with Express Ordering. During Express Ordering installation,
there is a tab related to the IP addressing of the MicroPlus KMS system. If
this was ignored, you will need assistance from Gilbarco/Xpedient Help
Desk to get this configured. If Kitchen Monitor is working with primary Kiosk
(001) but not secondary kiosks, you need to edit file to add remote printer
to secondary kiosks. This was detailed above in Kitchen Monitor setup. You
will need to edit the %localappdata%\xpedient\kiosk\kioskconfiguration.xml
to address the issue.

Kiosk
functionality
(software)

Wrong prices for
some items

Price Book not updated

Ensure kiosk is communicating to the store network if they have back office
or to Passport network if using V10 L Patch, escalate to Xpedient.

Wrong content

Escalate to Xpedient.

Express Ordering Kiosk

Component

Symptom

Probable Cause

Possible Solutions

«
...
67
68
69
70
»

Summary of Contents for Passport PX60







































































Reviews:

No comments

Related manuals for Passport PX60

Brand: Sercomm Pages: 30

Brand: e2v Pages: 66

Brand: IDS Pages: 22

Quick Clix QCM-099

Brand: Argus Pages: 1

QuickClix QC-3185

Brand: Argus Pages: 4

Nuvis S - Point & Shoot

Brand: Nikon Pages: 110

Brand: MYDLINK Pages: 2

Brand: MYDLINK Pages: 2

Brand: Elmo Pages: 2

Brand: Sony Pages: 3

Brand: Sony Pages: 3

Alpha DSLR-A850

Brand: Sony Pages: 2

Alpha DSLR-A550

Brand: Sony Pages: 1

Alpha DSLR-A560

Brand: Sony Pages: 2

Brand: Sony Pages: 16

Alpha DSLR-A350

Brand: Sony Pages: 4

Alpha DSLR-A330

Brand: Sony Pages: 1

Alpha DSLR-A290

Brand: Sony Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands