MDE-4288 Encore® USB Printer Kit M04489K00X • October 2004
Page 7
Installing the M04489K004/M04489K005 Kit
6
Using the Chamfer cutting tool, insert the tool through the printer mounting slot in the CIM
door. Hold the tool as shown in Figure 2 (also hold other end of tool) and shave off material
from the top of the slot until the blade of the tool fits vertically in the slot and a chamfer is cut
on the upper edge of the slot.
Figure 2: Cutting Chamfer in the Printer Slot
7
Using a sharp instrument (such as a knife) or a file, trim out access material in the corners of
the slot as shown in Figure 3.
Figure 3: Cleaning Corners in the Printer Slot
8
Clean up all material removed with the cutting tools.
Should fit flush after shaving
