GILBARCO VEEDER-ROOT Encore 300 Series, Installation Manual

Page: 71 / 90

MDE-3985L Encore® Installation Manual · May 2006 Page 67
Reference Information
4 – Reference Information
Information contained in this section is provided for the installing contractor’s reference. The
contractor may or may not be required by individual contract to perform all or any of the
requirements outlined. However, all installations must conform to the requirements of this
section. The information in this section can be found in more detail in MDE-3802 Encore and
Eclipse Site Preparation Manual.
Note: The information contained here is not to be used exclusively in lieu of the Site
Preparation Manual, as not all the information contained in that document is found
here.
Reference Contents
Section and Information
MDE-3802
Location
Installation Differences When Replacing The Advantage Series page 68
Electrical Requirements page 69
Emergency Power Cutoff Switch
Circuit Breakers
STP (Submerged Turbine Pump) Control Relay Boxes for Dispensers
STP Isolation Relays for Electronic Dispensers
Conduit page 71
Wiring page 71
Data Wire Lengths
High Speed Communications Wiring page 73
Twisted-Pair Cable page 74
Twisted-Pair Cable page 74
Twisted-Pair Installation Personnel and Procedures
Grounding page 75
Sealing ‘Y’ Fittings page 76
Plumbing Requirements page 77
Pipe Installation
Pipe Size
Pumps (Standard Flow)
Pumps (High Flow)
Dispensers (Standard Flow)
Dispensers (High Flow)
Dispensers (Ultra-Hi High Gallon)
Check Valves page 78
Shear Valves