GILBARCO VEEDER-ROOT Encore 300 Series, Installation Manual

Page: 15 / 90

MDE-3985L Encore® Installation Manual · May 2006 Page 11
Installation
3 – Installation
Replacing The Advantage
®
Series with Encore
If replacing existing The Advantage unit(s) with Encore, before beginning read “Installation
Differences When Replacing The Advantage Series” on page 68 .
Required Equipment and Materials
Below is a list of items required to properly install the equipment.
• Anchor bolts
• U-bolts for fastening piping to braces.
• Sealant that is UL approved for use with fuels being encountered
• Pit Box cover plates. Use when necessary to adapt unit to pre-existing pit poxes.
• Lifting device (crane, backhoe, forklift, and so on.) to move and lift pump/dispenser
• Nylon slings (with a safety lift factor of 5) and screw-pin anchor shackles to lift high hose
pump/dispenser (Reference: See “Encore Shipping Weight and Model Codes: N-X-X” on
page 5 )
• Breakaways, hoses, nozzles, and swivels
• Barricades
• Potting compound and fiber dam material to allow potting of conduit in accordance with
Class I, Division II locations as specified in the National Electric Code.
• WAGO™ spring loaded terminal tool, WAGO Part #236-332
Note: WAGO tool is recommended but not required. Small insulated shaft and handle
screwdriver or a non-conductive screwdriver can be used in lieu of this.
Read NFPA 30A and NFPA 70
Before installing the equipment, read, understand and follow:
• The National Electric Code (NFPA 70)
• The Automotive and Marine Service Code (NFPA 30A)
• Any national, state, and local codes that may apply
The failure to install the equipment in accordance with NFPA 30A and NFPA 70 may
adversely effect the safe use and operation of the system.
Accurate, sound installations reduce service calls. Use experienced, licensed contractors that
practice accurate, safe installation techniques. Careful installation can eliminate potential
problems.
WARNING
You are working in a dangerous environment of gasoline, gasoline vapor and electricity.
Failure to install this equipment in accordance with NFPA 30A and NFPA 70 could result in severe
injury or death.
Read, understand and follow NFPA 30A and NFPA 70.