2
en
Gigaset DA210 / IM1 en/ A30054-M6527-R101-7-6Z19 / DA210_en.fm / 20.01.2012
Connecting the telephone
Safety precautions
When installing, connecting and
operating the telephone, always
observe the following precautions:
u
Only use the jacks and leads sup-
plied.
u
Only connect the connecting
lead to the intended socket.
u
Only connect approved accesso-
ries.
u
Lay the connecting lead where it
will not cause accidents.
u
Position the telephone on a non-
slip surface.
u
For your safety and protection,
the telephone may not be used
in the bath or shower rooms (wet
locations). The telephone is not
splash proof.
u
Never expose the telephone to
sources of heat, direct sunlight or
other electrical devices.
u
Protect your telephone from
moisture, dust, corrosive liquids
and vapours.
4
3
2
2
5
4
1
¤
Guide the cable through the
cable channel of the handset
cradle: upwards for operat-
ing the phone on the table
(2);
downwards when mount-
ing the phone on the wall
(3).
Wall mounting
¤
Drill two dowel holes into the wall
at a vertical distance of 85 mm and fix
two screws.
¤
Lift out the handset bracket (4) with a
screwdriver and clip it into the handset
cradle (5).
¤
Hang the telephone on the projecting
screw heads.
Please note:
The handset bracket must be
placed in the cradle with the slanting edge
facing forwards (see graphic), as otherwise
the handset will not be properly secured.
¤
Connect your telephone to the main phone socket
using the supplied telephone cable.
¤
Plug the coiled end of the cable into the handset (1).
