Gigaset Gigaset 2015 Operating Instructions Manual Download Page 39

Page: 39 / 86

Open listening, multi-address calls and internal calls

Gigaset 2015, GBR: A30852-X-1105-B301-1-7619

kap07.fm4

4.8.99

Calling an internal station

If there are several mobile units (

➔

page 57), you can

make internal calls to the other mobile units. These calls
are free of charge.

Addressing other persons in the room via loudspeaker (voice calling)

You can speak directly to other persons in the room by
way of the base station loudspeaker.

Terminating a call internally

Press the internal key on your own mobile unit and enter
the number of the required unit (1 to 6). You hear internal
ringing tone. The mobile unit is called.

You can check your own internal number by
pressing

Start the procedure.

There is an advisory announcement:

“Voice calling“

A preparatory tone is then applied. Speak via the
loudspeaker.

Replace the mobile unit in the base station or charger
unit. The connection is cleared down.

Clear down the connection.

Summary of Contents for Gigaset 2015























































































Search results

Summary of Contents for Gigaset 2015

Reviews:

Related manuals for Gigaset 2015

Brands by name

Popular brands

Gigaset Gigaset 2015, Operating Instructions Manual

Search results

Summary of Contents for Gigaset 2015

Reviews:

Related manuals for Gigaset 2015

Brands by name

Popular brands