Internal consultation and call transfer
29
Gigaset 2015, GBR: A30852-X-1105-B301-1-7619
KAP08.FM4
4.8.99
Operation in connection with a PBX
During an external call you can consult with another
station user connected to your telecommunications
system (PBX). In such cases note carefully the operating
instructions for the telecommunications system and also
the section “Setting the signalling method” in these
instructions (
➔
page 12).
Terminating consultation/continuing external call
Call transfer
Operation with several mobile units
If a number of mobile units are in operation (
➔
page 57),
you can transfer an external call to an internal station user.
R
Initiate consultation. You hear dial tone. The external call
is held.
o
Enter the number of the required station. The user is
called.
R
Terminate internal consultation. You are reconnected to
the external subscriber.
I
o
Press the internal key and then enter the number of the
required mobile unit (1 to 6). You hear internal ringing
tone. The mobile unit is called. The external call is held.
either
Wait until the internal party answers. Inform this user
about the outside call.
a
Transfer the external call.
or
a
Instead of waiting until the called party answers, transfer
the call directly.
Instead of pressing
a
you can replace your
mobile unit in the charger unit.
If you transfer the external call directly and the
user fails to take the call within 30 seconds, you
are recalled.
If you transfer the external call directly and the
user is busy, you are recalled immediately.
If you take the recall, you are reconnected to the
external subscriber. A recall is taken in the same
way as any other type of call (
➔
page 20).
