Gigaset E390 Manual Download Page 56

Page: 56 / 91

mplat

odu

, V

ion 2,

.02.

20,

SMS (text messages)

Gigaset E390-E390A / LUG_Kombi CH en / A31008-M2908-F101-1-2X19 / applications_2.fm / 4/30/20

SMS status report

If the function is activated, you will receive an SMS with status information from the SMS service
centre for each SMS that has been sent.

SMS troubleshooting

Self-help with errors

You cannot send messages

•

You have not requested the CLIP service (Calling Line Identification Presentation).

Ask your network provider to enable the feature.

•

SMS sending was interrupted (e.g. by a call).

Re-send the SMS.

•

The network provider does not support this feature.

•

No number or an incorrect one has been entered for the send service centre.

Enter the number (

p. 54).

SMS text is incomplete

•

The phone's memory is full.

Delete old SMS messages.

•

The network provider has not yet sent the rest of the SMS.

You have stopped receiving SMS messages

Call divert has been activated for

All calls

Change call divert (

p. 23).

. . . use

to select

SMS

Settings

Status Report

Change

(

= activated)

Requesting a status report may incur additional costs.

Calling Line Identification permanently withheld (CLIR) or Calling Line Identification not
activated.

Error occurred while sending SMS.

Connection to SMS service centre failed, see self-help.

Summary of Contents for E390




























































































Search results

Summary of Contents for E390

Reviews:

Related manuals for E390

Brands by name

Popular brands

Gigaset E390, Manual

Search results

Summary of Contents for E390

Reviews:

Related manuals for E390

Brands by name

Popular brands