Gigaset E390 Manual Download Page 35

Page: 35 / 91

Gigaset E390-E390A / LUG_Kombi CH en / A31008-M2908-F101-1-2X19 / answering_m_A.fm / 4/30/20

mplat

odu

, V

ion 2,

.02.

Local answer machine (if available)

Activating/deactivating call screening

During recording of a message you can screen a call via the handset loudspeaker:

Permanently switching call screening on/off:

Switching off call screening for the current recording:

Press the display key

Silence

or the End call key

. . . Pick up call using

Operating when on the move (remote operation)

Access answer machine or switch answer machine on from another telephone (e.g. hotel, mobile
phone).

Switching on the answer machine

Call the telephone connection and let it ring until the announcement "Please enter PIN"
(approx. 50 seconds) . . . use

to enter the telephone's system PIN within 10 seconds . . .

the answer machine is switched on, the remaining memory is announced, messages are
played back

Checking the answer machine

Call the telephone connection . . . during the announcement press key

. . . playback of

the announcement is interrupted enter system PIN

You are informed whether any new messages have been recorded. Message playback begins.

The answer machine is operated using the following keys:

. . . use

to select

Answer Machine

Call Screening

Change

(

= activated) . . . call screening is switched on/off for all registered handsets

The system PIN is set to something other than 0000 and the other telephone has tone
dialling (DTMF).

Incorrect PIN is entered or entry takes too long (more than 10 seconds): The
connection is interrupted. The answer machine will remain deactivated.

The answer machine cannot be deactivated remotely.

The answer machine is activated.

During the time stamp playback: Skip to previous message.

During message playback: Go to the start of the current message.

Pause playback. Press again to resume.

After a pause of approx. 60 seconds, the connection is ended.

Go to the next message.

Repeat the last 5 seconds of the message playback.

Summary of Contents for E390




























































































Search results

Summary of Contents for E390

Reviews:

Related manuals for E390

Brands by name

Popular brands

Gigaset E390, Manual

Search results

Summary of Contents for E390

Reviews:

Related manuals for E390

Brands by name

Popular brands