Gigaset DL500a Manual Download Page 51

Page: 51 / 137

Sending SMS (text messages)

Gigaset DL500A / GRC EN / A31008-N3103-T101-2-7619 / sms_BRD_neutral.fm / 20.01.11

rsion 4, 16.0

.2005

Opening the draft list

Messaging

SMS

Draft

The first list entry is displayed, for example:

If the entry has been saved with the phone
number i.e., when an SMS was saved from
the incoming list, the number is displayed in
the first line.

Reading or deleting SMS messages

Open the draft list and then:

Select SMS.

§Read§

Press the display key. The text is
displayed. Scroll line by line
using

Or delete the SMS with

§Options§

Delete Entry

§OK§

Writing/changing an SMS

You are reading an SMS in the draft list.

§Options§

Open menu.

You have the following options:

Send

Send stored SMS

(

page 48)

Edit

Edit the text of the saved SMS and then
send it

(

page 48)

Character Set

Display text in the selected character set.

Deleting the draft list

Open the draft list and then:

§Options§

Open menu.

Delete List

Select, press

§OK§

and confirm

with

§Yes§

. The list is deleted.

Sending SMS messages to an
e-mail address

If your service provider supports the

SMS as

e-mail

feature, you can also send your SMS

messages to e-mail addresses.

The e-mail address must be at the beginning
of the text. You must send the SMS to your
SMS service centre's e-mail service.

Messaging

SMS

New SMS

Transfer the e-mail address from
the directory or enter it manu-
ally. End the entry with a space
or colon (depending on the
service provider).

Enter the SMS text.

§Options§

Press the display key.

Send

Select and press

§OK§

E-mail

Select and press

§OK§

. If the

number of the e-mail service is
not entered

(

page 52)

, enter

the number of the e-mail serv-
ice.

§Send§

Press the display key.

Sending SMS messages as a fax

You can also send an SMS to a fax machine.

Prerequisite

: Your network provider sup-

ports this feature.

You are writing an SMS

(

page 48)

§Options§

Press the display key.

Send

Select and press

§OK§

Fax

Select and press

§OK§

Select number from the direc-
tory or enter it manually.
Enter the number with area
code (even if you are in the
same area).

§Send§

Press the display key.

Saved

10.01.10 15:07

Summary of Contents for DL500a










































































































































Search results

Summary of Contents for DL500a

Reviews:

Related manuals for DL500a

Brands by name

Popular brands

Gigaset DL500a, Manual

Search results

Summary of Contents for DL500a

Reviews:

Related manuals for DL500a

Brands by name

Popular brands